Open-AudIT

What's on your network?
It is currently Wed Jan 24, 2018 1:39 am

All times are UTC + 10 hours




Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 6 posts ] 
Author Message
PostPosted: Thu May 03, 2007 1:43 pm 
Offline
Site Admin
User avatar

Joined: Mon Jun 07, 2004 11:48 am
Posts: 1935
Location: Brisbane, Australia
Please feel free to copy the code below, paste it into a file, make file file permissions executable, and give it a go.... I have only tested it on my Ubuntu 7.04 laptop, so far. It works without needing root/sudo/su use. It should work in any distro that uses HAL. The software output is only for Ubuntu (so far).

It will create an html file, wich you can then view and print from your browser.

Input into OA will come later...

Thoughts / comments / bugs and improvements most welcome.

Code:
#!/bin/bash

HOSTNAME=`hostname`
DATE="`date +%d/%m/%Y``date +%H:%M:%S`"
REPORTFILE=$HOSTNAME.html
AUDITDATE="`date +%Y%m%d``date +%H%M%S`"
SYSTEMNAME=`uname -s`
SYSTEMVERSION=`uname -r`
AUDIT_BY=`whoami`


#Operating System
name=`uname -s`
version=`uname -r`

if test -f /etc/redhat-release; then
    distribution="RedHat"
    release=`cat /etc/redhat-release`
  elif test -f /etc/redhat-version; then
    OS_DISTRIBUTION="RedHat"
    OS_RELEASE=`cat /etc/redhat-version`
  elif test -f /etc/fedora-release; then
    OS_DISTRIBUTION="Fedora"
    OS_RELEASE=`cat /etc/fedora-release`
  elif test -f /etc/mandrake-release; then
    OS_DISTRIBUTION="Mandrake"
    OS_RELEASE=`cat /etc/mandrake-release`
  elif test -f /etc/SuSE-release; then
    OS_DISTRIBUTION="Novell SuSE"
    OS_RELEASE=`cat /etc/SuSE-release`
  elif test -f /etc/issue; then
    OS_DISTRIBUTION="Ubuntu"
    OS_RELEASE=`cat /etc/issue`
  elif test -f /etc/debian_version; then
    OS_DISTRIBUTION="Debian"
    OS_RELEASE=`cat /etc/debian_version`
  elif test -f /etc/debian-version; then
    OS_DISTRIBUTION="Debian"
    OS_RELEASE=`cat /etc/debian-version`
  elif test -f /etc/arch-release; then
    OS_DISTRIBUTION="Arch"
    OS_RELEASE=`cat /etc/arch-release`
  elif test -f /etc/gentoo-release; then
    OS_DISTRIBUTION="Gentoo"
    OS_RELEASE=`cat /etc/gentoo-release`
  elif test -f /etc/slackware-release; then
    OS_DISTRIBUTION="Slackware"
    OS_RELEASE=`cat /etc/slackware-release`
  elif test -f /etc/slackware-version; then
    OS_DISTRIBUTION="Slackware"
    OS_RELEASE=`cat /etc/slackware-version`
  elif test -f /etc/yellowdog-release; then
    OS_DISTRIBUTION="Yellow dog"
    OS_RELEASE=`cat /etc/yellowdog-release`
  else distribution="unknown"
    OS_RELEASE="unknown"
fi

if [ "$OS_RELEASE" = "Ubuntu 5.10 \n \l" ]
then
  OS_RELEASE="5.10 (Breezy Badger)"
fi
if [ "$OS_RELEASE" = "Ubuntu 6.06 LTS \n \l" ]
then
  OS_RELEASE="6.06 (Dapper Drake)"
fi
if [ "$OS_RELEASE" = "Ubuntu 6.10 \n \l" ]
then
  OS_RELEASE="6.10 (Edgy Eft)"
fi
if [ "$OS_RELEASE" = "Ubuntu 7.04 \n \l" ]
then
  OS_RELEASE="7.04 (Fiesty Fawn)"
fi
if [ "$OS_RELEASE" = "Ubuntu 7.10 \n \l" ]
then
  OS_RELEASE="7.10 (Gutsy Gibbon)"
fi

# System Info
PC=`hal-find-by-property --key info.product --string Computer`
PC_MANUFACTURER=`hal-get-property --udi $PC --key system.vendor`
PC_MODEL=`hal-get-property --udi $PC --key system.product`
PC_TYPE=`hal-get-property --udi $PC --key system.formfactor`
PC_UUID=`hal-get-property --udi $PC --key smbios.system.uuid`
PC_SERIAL=`hal-get-property --udi $PC --key smbios.system.serial`
PC_BIOS_DATE=`hal-get-property --udi $PC --key smbios.bios.release_date`
PC_BIOS_VERSION=`hal-get-property --udi $PC --key smbios.bios.version`
PC_KERNEL_TYPE=`hal-get-property --udi $PC --key system.kernel.machine`
PC_KERNEL_VERSION=`hal-get-property --udi $PC --key system.kernel.version`
PC_CHASSIS=`hal-get-property --udi $PC --key smbios.chassis.type`
PC_COUNTRY=`cat /etc/timezone`
PC_TIMEZONE=`date | cut -d" " -f5`
RAM_SIZE_KB=`cat /proc/meminfo | grep MemTotal |cut -d: -f2 | cut -dk -f1`
RAM_SIZE_KB=`expr $RAM_SIZE_KB / 1`
RAM_SIZE_KB=`expr $RAM_SIZE_KB / 1024`
CPU_NUMBER=`cat /proc/cpuinfo | grep "processor" | wc -l`
CPU_NAME=`cat /proc/cpuinfo | grep "model name" | cut -d: -f2 | cut -c2- | tr "\n" "^" | cut -d^ -f1`
CPU_SPEED=`cat /proc/cpuinfo | grep "cpu MHz" | cut -d: -f2 | cut -c2- | cut -d. -f1 | tr "\n" "^" | cut -d^ -f1`
CPU_MANUFACTURER=`cat /proc/cpuinfo | grep "vendor_id" | cut -d: -f2 | cut -c2- | tr "\n" "^" | cut -d^ -f1`
CPU_SPEEDSTEP=`lshal --long --show /org/freedesktop/Hal/devices/acpi_CPU0 | grep processor.can_throttle | cut -d" " -f5 | cut -d"'" -f2`
if [ "$PC_UUID" = "Not" ]
then
  PC_UUID="$HOSTNAME"
fi

echo "<!DOCTYPE html PUBLIC \"-//W3C//DTD XHTML 1.0 Strict//EN\"  \"http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd\"> " > $REPORTFILE
echo "<html>" >> $REPORTFILE
echo "<head>" >> $REPORTFILE
echo "<title>Open-AudIT - Audit Result</title>" >> $REPORTFILE
echo "<style type=\"text/css\">" >> $REPORTFILE
echo "body {" >> $REPORTFILE
echo " font-family: verdana;" >> $REPORTFILE
echo " font-size: 9pt;" >> $REPORTFILE
echo "}" >> $REPORTFILE
echo "h1,h2 {" >> $REPORTFILE
echo " font-family: Trebuchet MS;" >> $REPORTFILE
echo "}" >> $REPORTFILE
echo ".content {" >> $REPORTFILE
echo " position: relative;" >> $REPORTFILE
echo " width: 600px;" >> $REPORTFILE
echo " min-width: 700px;" >> $REPORTFILE
echo " margin: 0 0px 10px 0px;" >> $REPORTFILE
echo " border: 1px solid black;" >> $REPORTFILE
echo " background-color: white;" >> $REPORTFILE
echo " padding: 10px;" >> $REPORTFILE
echo " z-index: 3;" >> $REPORTFILE
echo " font-family: verdana;" >> $REPORTFILE
echo " font-size: 9pt;" >> $REPORTFILE
echo "}" >> $REPORTFILE
echo "</style>" >> $REPORTFILE
echo "</head>" >> $REPORTFILE
echo "<body>" >> $REPORTFILE
echo "<h1>Open Audit</h1><br />" >> $REPORTFILE
echo "<div id=\"content\">" >> $REPORTFILE
echo "<table border=\"0\" cellpadding=\"2\" cellspacing=\"0\" class=\"content\">" >> $REPORTFILE
echo "<tr><td colspan=\"2\"><b>System Information</b></td></tr>" >> $REPORTFILE
echo "<tr bgcolor=\"#F1F1F1\"><td width=\"250\">System Name: </td><td>$HOSTNAME</td></tr>" >> $REPORTFILE
echo "<tr><td>Distribution: </td><td>$OS_DISTRIBUTION - $OS_RELEASE</tr>" >> $REPORTFILE
echo "<tr bgcolor=\"#F1F1F1\"><td>Linux Kernel: </td><td>$PC_KERNEL_VERSION</td></tr>" >> $REPORTFILE
echo "<tr><td>Linux Kernal Type: </td><td>$PC_KERNEL_TYPE</tr>" >> $REPORTFILE
echo "<tr bgcolor=\"#F1F1F1\"><td>System Manufacturer: </td><td>$PC_MANUFACTURER</td></tr>" >> $REPORTFILE
echo "<tr><td>System Type: </td><td>$PC_TYPE</td></tr>" >> $REPORTFILE
echo "<tr bgcolor=\"#F1F1F1\"><td>System Model - Serial: </td><td>$PC_MODEL - $PC_SERIAL</tr>" >> $REPORTFILE
echo "<tr><td>System UUID: </td><td>$PC_UUID</tr>" >> $REPORTFILE
echo "</table>" >> $REPORTFILE



# System Hardware
echo "<table border=\"0\" cellpadding=\"2\" cellspacing=\"0\" class=\"content\">" >> $REPORTFILE
echo "<tr><td colspan=\"2\"><b>Hardware Information</b></td></tr>" >> $REPORTFILE
echo "<tr bgcolor=\"#F1F1F1\"><td>Number of Processors: </td><td>$CPU_NUMBER</td></tr>" >> $REPORTFILE
echo "<tr><td width=\"250\">Processor Speed: </td><td>$CPU_SPEED Mhz</td></tr>" >> $REPORTFILE
echo "<tr bgcolor=\"#F1F1F1\"><td>Processor Name: </td><td>$CPU_NAME</td></tr>" >> $REPORTFILE
echo "<tr><td>Processor Manufacturer: </td><td>$CPU_MANUFACTURER</td></tr>" >> $REPORTFILE
echo "<tr bgcolor=\"#F1F1F1\"><td>Processor SpeedStep Capable: </td><td>$CPU_SPEEDSTEP</td></tr>" >> $REPORTFILE
echo "<tr><td>Amount of Memory</td><td>$RAM_SIZE_KB Mb<td></tr>" >> $REPORTFILE
echo "<tr bgcolor=\"#F1F1F1\"><td>System Bios Date: </td><td>$PC_BIOS_DATE</tr>" >> $REPORTFILE
echo "<tr><td>System Bios Version: </td><td>$PC_BIOS_VERSION</td></tr>" >> $REPORTFILE
# Graphic Card
PCILIST=`lspci -vm`
PERIF=`lspci -vm | grep "[[:digit:]]:[[:digit:]]" | cut -f2`
for i in $PERIF; do
  PCI_TYPE=`echo "$PCILIST" | grep -w $i -A 4 | grep -w "Class:" | cut -d":" -f2 | cut -f2`
  PCI_NAME=`echo "$PCILIST" | grep -w $i -A 4 | grep -v "[[:digit:]]:[[:digit:]]" | grep -w "Device:" | cut -d":" -f2 | cut -f2`
  PCI_MANUFACTURER=`echo "$PCILIST" | grep -w $i -A 4 | grep -w "Vendor:" | cut -d":" -f2 | cut -f2`
  PCI_DEVICE_ID=`echo $i`
  if [ "$PCI_TYPE" = "VGA compatible controller" ]
  then
    echo "<tr bgcolor=\"#F1F1F1\"><td>Video Card Namufacturer</td><td>$PCI_MANUFACTURER</td></tr>" >> $REPORTFILE
    echo "<tr><td>Video Card Name: </td><td>$PCI_NAME</td></tr>" >> $REPORTFILE
  fi
done
for i in `hal-find-by-property --key linux.subsystem --string sound`
do
  SOUND_PARENT=`hal-get-property --udi $i --key info.parent`
done
SOUND_CARD=`hal-get-property --udi $SOUND_PARENT --key info.product`
SOUND_VENDOR=`hal-get-property --udi $SOUND_PARENT --key info.vendor`
echo "<tr bgcolor=\"#F1F1F1\"><td>Sound Card Namufacturer</td><td>$SOUND_VENDOR</td></tr>" >> $REPORTFILE
echo "<tr><td>Sound Card Name: </td><td>$SOUND_CARD</td></tr>" >> $REPORTFILE


#Network
echo "<table border=\"0\" cellpadding=\"2\" cellspacing=\"0\" class=\"content\">" >> $REPORTFILE
echo "<tr><td colspan=\"2\"><b>Network Information</b></td></tr>" >> $REPORTFILE
NET_DNS=`cat /etc/resolv.conf | grep "nameserver" | cut -d" " -f2`
echo "<tr bgcolor=\"#F1F1F1\"><td width=\"250\">Network Name: </td><td>$HOSTNAME</td></tr>" >> $REPORTFILE
echo "<tr><td>DNS Server: </td><td>$NET_DNS</td></tr>" >> $REPORTFILE
#Network detection
echo "<tr><td colspan=\"2\"><br /><b>Network Adapters</b></td></tr>" >> $REPORTFILE
for i in `hal-find-by-property --key linux.subsystem --string net`
do
  NET_PARENT=`hal-get-property --udi $i --key info.parent`
  NET_NAME=`hal-get-property --udi $i --key net.interface`
  NET_MAC=`hal-get-property --udi $i --key net.address`
#  NET_ACTIVE=`hal-get-property --udi $i --key net.interface_up`
  NET_DESCRIPTION=`hal-get-property --udi $i --key info.product`
  NET_DEVICE=`hal-get-property --udi $NET_PARENT --key info.product`
  NET_MANUFACTURER=`hal-get-property --udi $NET_PARENT --key info.vendor`
  NET_IP=`ifconfig $NET_NAME | grep -w inet | cut -d":" -f2 | cut -d" " -f1`
  NET_IPV6=`ifconfig $NET_NAME | grep -w inet6 | cut -d" " -f13`
  NET_SUBNET=`ifconfig $NET_NAME | grep -w inet | cut -d":" -f4 | cut -d" " -f1`
  echo "<tr bgcolor=\"#F1F1F1\"><td>Adapter: </td><td><b>$NET_NAME</b> - $NET_DESCRIPTION</td></tr>" >> $REPORTFILE
  echo "<tr><td>Description: </td><td>$NET_DEVICE</td></tr>" >> $REPORTFILE
  echo "<tr bgcolor=\"#F1F1F1\"><td>Network Adapter Manufacturer</td><td>$NET_MANUFACTURER</td></tr>" >> $REPORTFILE
  echo "<tr><td>MAC Address: </td><td>$NET_MAC</td></tr>" >> $REPORTFILE
#  echo "<tr bgcolor=\"#F1F1F1\"><td>Active</td><td>$NET_ACTIVE</td></tr>" >> $REPORTFILE
  if [ "$NET_IP" != "" ]
  then
    echo "<tr bgcolor=\"#F1F1F1\"><td>IP Address: </td><td>$NET_IP</td></tr>" >> $REPORTFILE
    echo "<tr><td>Subnet: </td><td>$NET_SUBNET</td></tr>" >> $REPORTFILE
    echo "<tr bgcolor=\"#F1F1F1\"><td>IPv6: </td><td>$NET_IPV6</td></tr>" >> $REPORTFILE 
  fi
  echo "<tr><td><br /> </td><td></td></tr>" >> $REPORTFILE
done
echo "</table>" >> $REPORTFILE
echo "</div>" >> $REPORTFILE
#echo "<br />" >> $REPORTFILE



# Hard Disks
echo "<table border=\"0\" cellpadding=\"2\" cellspacing=\"0\" class=\"content\">" >> $REPORTFILE
echo "<tr><td colspan=\"2\"><b>Hard Drives</b></td></tr>" >> $REPORTFILE
for i in `hal-find-by-property --key storage.drive_type --string disk`
do
  DISK_VENDOR=`hal-get-property --udi $i --key storage.vendor`
  DISK_PATH=`hal-get-property --udi $i --key block.device`
  DISK_MODEL=`hal-get-property --udi $i --key storage.model`
  DISK_SIZE=`hal-get-property --udi $i --key storage.size`
  let "DISK_SIZE = $DISK_SIZE / 1024 / 1024 / 1024"
  DISK_SERIAL=`hal-get-property --udi $i --key storage.serial`
  echo "<tr bgcolor=\"#F1F1F1\"><td width=\"250\">Manufacturer: </td><td>$DISK_VENDOR</td></tr>" >> $REPORTFILE
  echo "<tr><td>Model: </td><td>$DISK_MODEL</td></tr>" >> $REPORTFILE
  echo "<tr bgcolor=\"#F1F1F1\"><td>Serial: </td><td>$DISK_SERIAL</td></tr>" >> $REPORTFILE
  echo "<tr><td>Size: </td><td>$DISK_SIZE Gb</td></tr>" >> $REPORTFILE
  echo "<tr bgcolor=\"#F1F1F1\"><td>Path: </td><td>$DISK_PATH</td></tr>" >> $REPORTFILE
  echo "<tr><td><br /> </td><td></td></tr>" >> $REPORTFILE
done
echo "</table>" >> $REPORTFILE


# Optical Drives
echo "<table border=\"0\" cellpadding=\"2\" cellspacing=\"0\" class=\"content\">" >> $REPORTFILE
echo "<tr><td colspan=\"2\"><b>Optical Drives</b></td></tr>" >> $REPORTFILE
for i in `hal-find-by-property --key storage.drive_type --string cdrom`
do
  CD_VENDOR=`hal-get-property --udi $i --key storage.vendor`
  CD_PATH=`hal-get-property --udi $i --key block.device`
  CD_PRODUCT=`hal-get-property --udi $i --key storage.model`
  CD_BUS=`hal-get-property --udi $i --key storage.bus`
  CD_MOUNT=`hal-get-property --udi $i --key linux.fstab.mountpoint`
  echo "<tr bgcolor=\"#F1F1F1\"><td width=\"250\">Manufacturer: </td><td>$CD_VENDOR</td></tr>" >> $REPORTFILE
  echo "<tr><td>Model: </td><td>$CD_PRODUCT</td></tr>" >> $REPORTFILE
  echo "<tr bgcolor=\"#F1F1F1\"><td>Bus: </td><td>$CD_BUS</td></tr>" >> $REPORTFILE
  echo "<tr><td>Path: </td><td>$CD_PATH</td></tr>" >> $REPORTFILE
  echo "<tr bgcolor=\"#F1F1F1\"><td>Mount Point: </td><td>$CD_MOUNT</td></tr>" >> $REPORTFILE
  echo "<tr><td><br /> </td><td></td></tr>" >> $REPORTFILE
done
echo "</table>" >> $REPORTFILE


#Volumes
echo "<table border=\"0\" cellpadding=\"2\" cellspacing=\"0\" class=\"content\">" >> $REPORTFILE
echo "<tr><td colspan=\"2\"><b>Volumes</b></td></tr>" >> $REPORTFILE
for i in `hal-find-by-property --key info.category --string volume`
do
  VOLUME_MOUNT_POINT=`hal-get-property --udi $i --key volume.mount_point`
  VOLUME_TYPE=`hal-get-property --udi $i --key volume.fstype`
  VOLUME_SIZE=`hal-get-property --udi $i --key volume.size`
  let "VOLUME_SIZE = $VOLUME_SIZE / 1024 / 1024"
  VOLUME_MOUNTED=`hal-get-property --udi $i --key volume.is_mounted`
  VOLUME_LABEL=`hal-get-property --udi $i --key volume.label`
  VOLUME_PATH=`hal-get-property --udi $i --key block.device`
  if [ "$VOLUME_TYPE" != "" ]
  then
    echo "<tr bgcolor=\"#F1F1F1\"><td width=\"250\">Volume Label: </td><td>$VOLUME_LABEL</td></tr>" >> $REPORTFILE
    echo "<tr><td>Volume Mounted: </td><td>$VOLUME_MOUNTED</td></tr>" >> $REPORTFILE
    echo "<tr bgcolor=\"#F1F1F1\"><td>Volume Filesystem Type: </td><td>$VOLUME_TYPE</td></tr>" >> $REPORTFILE
    echo "<tr><td>Volume Size: </td><td>$VOLUME_SIZE Mb</td></tr>" >> $REPORTFILE
    echo "<tr bgcolor=\"#F1F1F1\"><td>Volume Filesystem Path: </td><td>$VOLUME_PATH</td></tr>" >> $REPORTFILE
    if [ "$VOLUME_MOUNTED" = "true" ]
    then
      echo "<tr><td>Volume Mount Point: </td><td>$VOLUME_MOUNT_POINT</td></tr>" >> $REPORTFILE
    fi
    echo "<tr><td><br /> </td><td></td></tr>" >> $REPORTFILE
  fi
done
echo "</table>" >> $REPORTFILE



# Software
if [ "$OS_DISTRIBUTION" = "Ubuntu" ]
then
  echo "<table border=\"0\" cellpadding=\"2\" cellspacing=\"0\" class=\"content\">" >> $REPORTFILE
  echo "<tr><td colspan=\"2\"><b>Software</b></td></tr>" >> $REPORTFILE
  echo "<tr><td width=\"250\"><i>Name of Package</i></td><td><i>Version</i></td></tr>" >> $REPORTFILE
  TR_BACK="#FFFFFF"
  packages="apt azureus bash build-essential cdparanoia cdrdao cdrecord cpp cron cupsys cvs dbus dhcp3-client diff dpkg epiphany-browser esound evolution firefox flashplugin-nonfree foomatic-db g++ gaim gcc gdm gedit gimp gnome-about gnucash gnumeric gtk+ httpd inkscape iptables k3b kdebase koffice libgnome2-0 linux-image-386 metacity mozilla-browser mysql-admin mysql-query-browser mysql-server-4.1 nautilus openoffice.org openssh-client openssh-server perl php4 php5 postfix postgresql python python2.4 rdesktop rhythmbox samba-common sendmail smbclient subversion sun-j2re1.5 swf-player synaptic thunderbird tsclient udev vim vlc vnc-common webmin xfce xmms xserver-xorg"
  for name in $packages; do
    version=`dpkg --list | grep "  $name " |tail -n1|awk '{print $3}' 2> /dev/null`
    if [ "$version" ]
    then
      if [ "$TR_BACK" = "#F1F1F1" ]
      then
        TR_BACK="#FFFFFF"
      else
        TR_BACK="#F1F1F1"
      fi
      echo "<tr bgcolor=\"$TR_BACK\"><td>$name</td><td>$version</td></tr>" >> $REPORTFILE
    fi
  done
  echo "</table>" >> $REPORTFILE
fi



exit 0



Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Thu May 03, 2007 11:32 pm 
Works pretty good, but I found a few errors.
Quote:
error: libhal_device_get_property_type: org.freedesktop.Hal.NoSuchProperty: No property linux.fstab.mountpoint on device with id /org/freedesktop/Hal/devices/storage_model_LITE_ON_LTR

That would be my CD-RW drive. The other drive (DVD), though not really mounted, did come up with /media/cdrom0. May need to check if mounted first.

Also, my volumes came back unmounted. That's odd, since /dev/sda1 is my root file system!

Looks great though!


Top
  
Reply with quote  
 Post subject:
PostPosted: Fri May 04, 2007 8:45 am 
Offline
Site Admin
User avatar

Joined: Mon Jun 07, 2004 11:48 am
Posts: 1935
Location: Brisbane, Australia
Hey Mikey, what distro ? Also, what version of HAL ? (lshal --v).

Also, can anyone testing this, please post their distro and HAL version. Thx.


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Fri May 04, 2007 11:09 am 
Ubuntu 7.04 (lshal 0.5.8.1)


Top
  
Reply with quote  
 Post subject:
PostPosted: Fri May 04, 2007 12:49 pm 
Offline
Site Admin
User avatar

Joined: Mon Jun 07, 2004 11:48 am
Posts: 1935
Location: Brisbane, Australia
Something odd there.
My CDRom reports fine, if mounted, or not.
The swap volume is reported, even though not mounted.
Other partitions also report fine, with their correct configuration.
:cry:


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Fri May 04, 2007 5:19 pm 
I have both a cd-rw and a dvd drive. You don't check if mounted, so perhaps that's the error? The dvd drive reports fine, but not cd-rw. Swap reports unmounted. But /dev/sda1... don't know why that's not mounted!!!


Top
  
Reply with quote  
Display posts from previous:  Sort by  
Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 6 posts ] 

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group